Home > Solid Hotplate for your AEG Hob

Solid Hotplate for your AEG Hob

Stock Code: CR 13
Genuine / Alternative: High Quality Replacement
Please note: This product has been discontinued and is no longer available
 0 Review(s) Leave a review >

If your cooker requires a hotplate with a hole in it especially for a pan sensor, then this solid hotplate for your AEG hob is an excellent product. As an alternative to your original solid hotplate, this part guarantees nothing less than the highest quality. It should measure just the same as your existing hotplate, with a 180mm diameter, and an 8mm trim. The hole for a pan sensor, this allows the hob to cut the power when a pan is removed from the hotplate.

Before purchasing, we always recommend that you check your model number to ensure you are getting the correct spare part for your cooker. To do this, return to the Cooker Spare Parts homepage, and enter the manufacturer and the model number of your appliance. If you need further information on where to locate your model number, please visit the help centre.

  • High-quality replacement
  • Compatible with certain AEG and Neff cookers
  • Hotplate element
  • 2000W
  • Length: #mm (to the end of terminals)
  • Diameter: 180mm
  • Terminals: #mm (from centre to centre)
  • Fixings: #mm (from centre to centre)
  • # terminals
  • # fixings
  • Please check the model number of your appliance carefully before purchasing


loading... Loading results...