If we’ve learnt anything from re-runs of Jerry Springer and his “Final Thought” musings, it’s that a solid foundation is the basis of any long-term relationship (thanks, Jerry).

Coincidentally, the same thing applies to a free-standing oven!

Bring some stability back to your life and resume your balanced diet with these tips for fixing a wobbly cooker.

 

cooker wobbles,cooker wobbling,wobbly cooker

 

Shaken Not Stirred

A wobbly cooker can be more than just an annoying inconvenience; if you have hot liquids on the boil, it can quickly become a major hazard.

A simple task like boiling spaghetti shouldn’t leave you with a soaking floor and third-degree burns. Luckily, there are a few ways to avoid such a pasta disaster and keep your mealtimes safe and scold-free.

 

Footloose

If you discover your cooker wobbling, the very first thing to check is the feet of the cooker. If just one of the cooker feet is out by even the slightest amount, it can throw the whole levelling out of whack and leave your cooker swaying like a drunk at closing time.

When the oven is not in use, get up close and personal with the problem leg and inspect the issue, adjusting the height to ensure it is level with the other legs.

You may want to use a spirit level to ensure it’s just right. If necessary, adjust each leg accordingly so that all are aligned correctly to the same level.

If all goes to plan, your appliance should be back on its feet and good to go, leaving you with one ready steady cooker!

 

Finding Your Feet

If, on closer inspection, you find one or more of your cooker feet is on its last legs, it may be time to replace them. Simply swapping them with new ones could be all you need to get your cooker back on its feet and standing firm.

As luck would have it, here at Cooker Spare Parts, we have a variety of replacement cooker feet at our disposal, covering the most popular cooker brands on the market: from Hotpoint and Cannon to Indesit and Creda.

Find your feet with CSP today and browse our replacement cooker feet section for your make and model.

 

If you can’t find the correct cooker feet for your model, why not drop us a line today? Call 02920 452 510 or click below to drop us an email and banish your woeful cooker wobbles for good!

Contact Us

Have you lost that oven feeling? You’re not alone.

A dodgy cooking appliance can quickly turn a simple meal into a vengeful voyage of four-letter words.

Don’t fall foul to a faulty thermostat. Turn up the heat and save your kitchen compadre from a premature pilgrimage to the scrapyard with these tips on how to fix an oven knob.

 

oven knob won't turn

 

Oven knob problems

When it comes to oven knob issues, two of the most common problems are either that the knob won’t turn at all or that the oven knob turns but won’t register when it does.

If this is sounds like your dilemma, you’ve come to the right place!

So, don’t reach for the nearest hammer and slip into “Hulk Smash” mode just yet – there are still plenty of options available.

 

How to fix an oven knob

While it might seem like a minor issue, a stiff oven knob can cause a number of problems in the kitchen, particularly when it comes to food preparation. Nobody wants to rely on toast and microwave meals for the foreseeable future, so fixing the oven is paramount.

To get to the root of the problem before you begin, your first port of call should be removing the knob handle. The problem is likely to lie in either the peg shaft or the knob cap itself and this should settle the argument immediately.

However, while getting to the crux of the matter can be as easy as removing the cap, it can also lead to additional issues, if done incorrectly. Careless fiddling can result in a whole host of other knob-related problems, so be sure to take time and care.

 

How to remove an oven knob

Gently prise off the cap of your oven knob, placing your thumb on the front. If the cap is putting up a fight, try to ease it off with a butter knife on either side.

Once you’ve successfully removed the knob from your appliance, you can now inspect the shaft for damage. Without the casing, this should resemble a small peg protruding from the cooker front.

Using a pair of pliers, you can now attempt to turn the peg manually to change the temperature. If the peg now turns and works successfully, your problem lies in the knob itself (which can simply be replaced).

However, if it turns and still doesn’t register the temperature change, your problem likely lies within the thermostat or the oven wiring and will need professional attention.

 

How to fix a broken oven knob shaft

If you’ve followed the above steps and the peg still remains motionless, it could be a sign that the shaft has seized up. Should this be the case, WD40 is a handy weapon to have at your disposal.

Apply the WD40 to the peg and leave to soak in, ensuring the peg is well lubricated. Next, gently turn the peg, without applying too much force to avoid snapping. If the dial still won’t budge, it may be time to admit defeat and call in a pro.

 

What to do if your oven won’t turn off

If the oven knob is stuck in the “on” position, the number one priority on your mind before anything else will probably be turning the oven off safely.

A faulty oven knob can prove dangerous if it means you can no longer turn your oven off. As such, it’s important to know how to manually disconnect your oven, should the situation arise.

Disconnecting an electric oven

Some electric ovens will have a wall fitting that can allow you to simply shut off the power at the flick of a switch. However, this isn’t always the case, especially if you have a built-in wall oven.

If you don’t have a wall switch, you may need to check the cabinet under the oven and cut the power via the oven’s fuse box.

Disconnecting a gas oven

For gas ovens, you will have to manually turn off the gas. While this may seem like a precursor to an explosive scene from EastEnders, it’s actually a lot easier and less daunting than it sounds – luckily, with far less fireworks attached.

Gas supply valves are typically located behind or beneath the oven. All you need to do is gently pull the stove away from the wall enough to see the shut-off valve (usually painted red or yellow for easy identification). Simply turn the valve 90 degrees to the off position, stopping the flow of gas instantly.

 

If your oven knob needs replacing, head over to our dedicated cooker knobs page for our full range of replacement cooker knobs caps. If you’re still having issues with your oven knob that haven’t been rectified by the suggestions above, feel free to drop us a line on 02920 452 510 or send us an enquiry using the button below.

Get in Touch

Has your Rangemaster oven stopped working? There are a number of reasons that your oven might have broken, but don’t worry. We’re here to help you identify the problem and implement a solution!

Rangemaster Oven Getting Too Hot

If you have found that your Rangemaster oven is getting too hot and burning your food despite being at a reasonable temperature, it’s possible that your thermostat is faulty. The thermostat sets and regulates the temperature inside the oven, so if you suspect this part of your Rangemaster oven has broken, you should replace it immediately! Continuing to use an oven with a faulty thermostat is a huge health and safety risk.       

At Cooker Spare Parts we offer thermostats for Rangemaster’s gas and electric ovens, so you’ll be sure to find one to suit your needs. Browse our selection of Rangemaster thermostats by clicking the appropriate buttons below:

Gas Thermostats >           Electric Thermostats >

 

Need help replacing your Rangemaster thermostat – don’t worry, we have a helpful guide that will talk you through it!

Help me fit my new thermostat >

 

Rangemaster Oven Not Heating Up

One problem that you’ll no doubt notice right away, is when your oven stops heating up! Turn the oven on, set a temperature and leave the oven running for a little while. Still cold? Your cooker might be in need of a replacement oven element!

The oven element is the part that heats up inside the oven, so when this breaks it causes a real problem. Luckily, replacing an oven element is a relatively simple job, and they aren’t too expensive to buy! Take a look at our Rangemaster oven elements by clicking the button below.

Rangemaster Oven Elements >

 

Rangemaster Hob Not Working

Whether you need to fry or boil or steam something the cooker hob plays an important role in most everyday recipes! If you’ve noticed that your cooker hob isn’t working, you’ll probably want to fix the problem sooner rather than later! We can help! Browse our Rangemaster hob spares below, select the right one for your cooker using your model number, and get your Rangemaster hob working again in no time!

Browse Rangemaster Hob Spares >

 

If you find that these spares don’t help fix your Rangemaster cooker, don’t hesitate to give us a call on 02920 452 510, we will help you identify what’s wrong with your oven and advise you on the best solution.

Your cooker, unfortunately, is like many other things in life, it's not built to last forever. Unless you've discovered an immortal, ever-lasting oven, chances are you're going to have to replace either the oven itself or some of its parts at one time or another. But how long do cookers last? Read on to learn some of the things that you can do to prolong the life of your cooking appliance.

Modern cookers are designed to last as long as possible, especially those that offer the highest of specifications, but there will always come a day when it just seems to have given up. This may happen after many years, or soon after purchase, but it is always important to be aware that where electronics, heat and moving parts are present, there is the potential for something to go wrong. Like anything, if you don't properly care and look after your cooker, it's not going to work. Therefore it is vital to thoroughly clean your oven as regularly as possible to prevent grease and other detritus from building up and causing damage. If dealt with and removed early enough, your oven is far less likely to exhibit issues with functionality further down the line. A good scrub and clean not only improves the overall health of your cooker, but it also benefits hygiene. So, there will be far fewer chances of unusual tastes when eating your food!

If getting dirty while on your hands and knees to keep your cooker alive doesn't sound very appealing, then there is always the possibility of taking your oven in for a service. Most cooker manufactures will provide this as standard when you purchase your cooker, as well as any repairs that are covered under warranty. This, however, will ensure that if there are any parts such as fans or filters that need replacing, they can be found and dealt with as soon as possible. 

One of the most common signs to look out for to tell if your cooker is on the way out is when getting up to the required temperature takes longer than usual. This could indicate one of two things; either there is an issue with your cooker's seals or there are deeper issues with the heating element, indicating an irreversible decline in your oven's performance. You cooker, to some extent, may still work, but continuing to cook in this state may lead to more costlier issues in the future.  

So, what's better than cure? Prevention. Which is why it's extremely important to take note and practice the things talked about above. Regularly cleaning and replacing faulty parts will on average keep your cooker working for around 10-15 years, depending on the type and model. So, it is definitely worth taking that extra bit of time out every now and then to properly care for your oven!

If your oven is experiencing issues and you believe it to be due to faulty or damaged parts, then there is no reason to go out and buy a whole new oven, go ahead and get those parts replaced! We supply a wide range of like-for-like or high-quality alternatives here at Cooker Spare Parts for popular cooker brands such as Hotpoint, Belling and much more.

To view our full list of manufacturers, simply click the button below - for further information on our range of spare cooker parts, please do not hesitate to contact us today.

 View Full List of Manufacturers >

Range of Ovens

If your oven has stopped working or you have noticed a fault, then carry on reading. This blog post targets common oven problems and how they can be fixed. The majority of problems that occur among most ovens can be fixed independently and it doesn’t take too long either. I bet you’re thinking – “what oven parts do I need?” Well, think no further! Cooker Spare Parts provide a range of oven parts that help make fixing your oven that little bit easier and, a lot quicker. This post will explain the different replacements you will need if certain parts of your oven have stopped working and require replacing. 

  1. Not heating up

Firstly, if you have noticed your oven is not heating up how it should be, there’s no need to panic - this could be an easy fix.  

Gas oven:

If you have a gas oven, the issue could be down to a faulty igniter. In order to find this out, you can test one of the gas stovetops to see if it ignites. To check the temperature and turn on the gas of your oven, you more often than not press down on your dial, hear a few clicks and then the stovetops ignite. If this does not happen for you, you might want to consider replacing the igniter.

To replace the igniter, you can simply turn the oven off by disconnecting it from the main power socket. Remove your oven door so it’s easier for you to access your cooker’s igniter; remove the screws holding the igniter in place, and disconnect the wiring connection; connect your new igniter and then put everything back together – it’s as easy as that.  

If you’re still finding that your oven isn’t heating up as expected, you may have a problem with your thermostat. Your oven’s thermostat controls the amount of gas within the oven and allows the oven to reach a desired temperature (and of course, stopping it from under or over heating). If your thermostat is faulty, this can stop your gas oven from heating up correctly.

Electric oven:

If you have an electric oven, often, due to constant use, the heating elements can wear and stop working. You can often tell if an oven element is faulty if it doesn’t fully glow red/orange, or from its physical appearance. Visual indications are bulging; bright spots; or obvious cracks. If you notice any of these faults, then this is normally a sign that it’s time to replace your heating elements. Changing this only takes a short amount of time if you use the correct replacement part, and by following this step-by-step guide.

 

  1. It’s not heating to the correct temperature

It can sometimes be frustrating when your oven suddenly stops heating to the correct temperature but these appliances don’t last forever, and it is important to keep checking regularly, to make sure your oven is doing its job.

Gas oven:

If your gas oven isn’t heating up to the correct temperature, it may be because you need to change your oven thermostat. However, it could be simpler than that, and the part that could be causing you trouble could be as simple as a door seal. Heat may escape from your oven door and therefore, resulting in your food not being cooked properly.

Electric oven:

If you notice your food is coming out of the oven partly cold; or it’s not heating up at all, this is normally a sign that the temperature sensor inside your oven is broken. Before replacing your temperature sensor, make sure to check that your sensor is not touching the inside wall as this affects your ovens capability of measuring the temperature. If you find your oven is still not heating to the correct temperature, you can use an ohmmeter to test your sensor. Replacing the temperature sensor is also an easy job!

Both ovens:

If you have changed your temperature sensor and thermostat, and your oven still doesn’t heat correctly, one common problem is that it needs to be calibrated. To check that your oven knows when and how to heat up, you must test it by using an oven thermometer. Preheat your oven to 176°C and take the temperature reading after twenty-minutes, and every twenty-minutes or so for the next two-hours - make sure you write your temperature readings down as you go along. After your final reading, add up the total temperature heating and divide this by the number of readings you took. If you’re findings are different to the average 176°C, this will indicate that you need to adjust your oven’s temperature dial. Hopefully this will fix the job!

 

  1. It doesn’t cook food evenly

Another common oven problem is that it doesn’t cook your food evenly! If you have recently cooked some meals and noticed that they are cold in some parts and boiling in others, then this tends to sign that you have either a faulty heating element and thermostat, in your electric oven or thermostat and igniter, in your gas oven.

This problem can be easily fixed. All you have to do is preheat your oven and see if your heating elements light up (electric oven) or ignite (gas oven) and check that the temperature of the oven is the same as the temperature’s sensor. If after this diagnostic test your oven still isn’t working as desired, both heating elements and thermostats should be replaced, for electric ovens or thermostat and igniter, for gas ovens.

Additionally, if you are using baking trays or other trays whilst cooking, give them a clean or replace them. As trays are reflective, if they are not clean, the heat cannot bounce off them and therefore, cook your food as well. 

 

  1. Door won’t close properly

Lastly, the easiest fix and an extremely common oven problem is that your door doesn’t close properly. If you find your oven doesn’t heat up as well as it used to it may be because your oven has a loose door. As we use our ovens daily, the hinges; catches and seals can become faulty, especially if we open and close with some force. This is probably the easiest fix and can be done in minutes. All you need to do is replace the hinges and/or door catch/pin; and your oven will be as good as new! For help replacing your oven door hinge, check out this easy to follow guide.

There are many common oven problems that you encounter, but most of them are a really easy fix! All of the products advised to change faulty parts of your cooker are from Cooker Spare Parts. If you encounter further oven problems and would like guidance or advise, don’t hesitate to contact the Cooker Spare Parts support team.

Note: before ordering any parts, make sure they are compatible with your specific oven model/type. Your model type and details can be found on your oven and we have a search bar that allows you to directly search what you are specifically looking for.